Some figure ideas

Comments

• Thejulz Posts: 13Member, Tester

  March 2017 edited March 2017

  I'm fortunate enough to have a small lathe so I turned out the 9 DF towers from a bit of wood lying around. Hard wood is better. They are about 12mm in diameter and 15mm tall. Just guess the curve by eye and stick a bit of nail in for the barrel. pretty close to 1/270 scale (14,814 mm).

  20170302_120713.jpg 1.8M

  20170130_112116.jpg 2.5M
• Thejulz Posts: 13Member, Tester

  March 2017

  The 1.4 FD-P towers are thumb tacks stuck on to the head of a sawn off tec screw, they end up being about 10mm tall, again quite close to the desired 1/270 scale (10.370 mm)

  20170302_120646.jpg 1.5M

  20170302_120656.jpg 1.3M
• Thejulz Posts: 13Member, Tester

  March 2017

  
  All the infantry is from Darkest star games, their 6mm sci fi range.
  Toying around with ideas for Hoth and Endor.

  20170302_120836.jpg 2M

  20170302_120726.jpg 1.3M

  20170302_121010.jpg 1.4M

  20170302_121126.jpg 1.7M

  20170302_120731.jpg 1.5M

  20170302_121038.jpg 1.5M

  20170302_120753.jpg 1.6M

  20170302_120805.jpg 1.7M

  20170302_120816.jpg 1.4M
• DBDraft Posts: 105Administrator

  March 2017

  They look great! Awesome job on the custom weapons! The basing really makes a difference and brings the scene to life in miniature. If you can get some Micro Machine AT-STs I think these will scale nicely with these models. You probably could make some AT-ATs with the skills you have shown here.